Lightweight firebrick is a high porosity energy saving refractory material, sintered at high temperature from premium refractory aggregates including porous mullite clinker, high alumina lightweight chamotte and low iron clay clinker. It delivers advantages of low bulk density, low thermal conductivity and low heat storage. All raw materials go through strict screening to limit impurities such as iron oxide and alkali metal oxides, ensuring stable performance and low reheat shrinkage under prolonged high temperature operating conditions.

Products Parameter
| Bulk density: | 0.4 ~ 1.0 g/cm³ ,different grades optional |
| Max service temperature: | 1100 ~ 1400 °C, depends on brick grade |
| Cold crushing strength: | 1.0 ~ 4.0 MPa |
| Thermal conductivity: | 0.18 ~ 0.35 W/(m·K) |
| Reheat linear change: | ≤ 1% |
| Standard sizes: | 230×114×65 mm, 230×114×76 mm; custom sizes available |
| Main composition: | Al₂O₃ content from 30% to 65% by grade |
Product Features
- Excellent thermal insulation: Its uniform porous structure achieves thermal conductivity of 0.18~0.35 W/(m·K), greatly cutting heat loss from furnace bodies.
- Lightweight and easy installation: With bulk density ranging only 0.4~1.0 g/cm³, it effectively reduces the load on furnace linings.
- Low heat storage: Minimal heat loss enables faster furnace heating and gentle cooling, suited for production cycles with intermittent temperature rise and fall.
- Precise and reliable dimensions: Dimensional tolerance is controlled within ±1.5 mm for narrower masonry joints and sound sealing of the overall furnace lining structure.
Application Fields
Lightweight firebricks are widely used as insulation backup layers for industrial furnaces and high temperature equipment. They work well in environments without erosion from molten metal, molten glass or strong corrosive gas.
- Industrial kiln insulation backup layers
- Metallurgy and heat treatment furnaces
- Ceramic and brick firing kilns
- Chemical high temperature reaction furnaces
- Power plant boiler insulation structures
- Glass furnace outer insulation layers

Three insulating brick families
Dezhong offers lightweight fireclay, high-alumina and mullite insulating brick options. Selection starts with the temperature at the installation position, the lining arrangement and the required balance between insulation and strength.
| Product family | Selection focus |
| Lightweight fireclay insulating brick | Discuss the insulation duty, temperature requirement and specified density. |
| Lightweight high-alumina insulating brick | Confirm the composition, density, strength and thermal data of the selected grade. |
| Lightweight mullite insulating brick | Review composition, temperature suitability, dimensional stability and insulation requirements. |
FAQ
Q: Can lightweight firebrick be used where it touches direct flame?
A: No. This brick is made for thermal insulation backup layers only. It cannot be used in locations with direct high speed flame impact, molten material erosion or heavy mechanical wear.
Q: Does lightweight firebrick handle thermal shock well?
A: Yes. Its stable porous structure relieves internal thermal stress during temperature cycling, helping avoid surface peeling and crack growth under repeated heating and cooling.
Q: Can you produce custom sizes and shaped bricks?
A: Yes. We supply standard bricks and custom special shaped bricks according to your project drawings and installation requirements.
Hot Tags: lightweight firebrick, China lightweight firebrick manufacturers, suppliers, factory, Silicon Carbide Refractory Bricks, Silica Refractory Brick, Mullite Refractory Bricks, Carborundum Brick, Lightweight Insulating Fire Bricks, Corundum Brick