Corundum bricks are refractory materials with an alumina content greater than 90% and corundum as the main crystalline phase. They possess very high room-temperature compressive strength (up to 340 MPa), a high load softening initiation temperature (greater than 1700℃), and excellent chemical stability, exhibiting strong resistance to acidic or alkaline slags, metals, and molten glass.
Thermal shock resistance is related to its microstructure; denser products have good corrosion resistance but poor thermal shock resistance. They are classified into sintered corundum bricks and fused alumina bricks. They can be produced by sintering sintered alumina and fused alumina as raw materials, or by combining bauxite clinker with a high Al2O3/SiO2 ratio with sintered alumina. Unfired corundum bricks can also be made using phosphoric acid or other binders. They are mainly used in blast furnaces and blast furnace hot blast stoves in ironmaking, ladle refining furnaces in steelmaking, sliding water systems, glass melting furnaces, and furnaces in the petrochemical industry.
Corundum bricks have been widely used as lining materials in petrochemical thermal equipment subjected to high temperatures, high pressures, chemical corrosion, and severe mechanical wear. With advancements in petrochemical production technology, many new processes and technologies have been adopted. To achieve high load capacity, long operating cycles, low energy consumption, and low costs, in addition to modifying various thermal equipment, higher requirements have been placed on the lining materials of these systems. Therefore, a series of chromium corundum products with improved high-temperature resistance and corrosion resistance has been developed to meet the needs of the petrochemical industry.
