General Properties Of Refractory Materials

Feb 02, 2026

Leave a message

Among common and special refractory materials, the following are the most frequently used:

 

Acidic

Silica bricks and clay bricks are used in large quantities. Silica bricks are siliceous products containing more than 93% SiO2, and the raw materials used include silica and waste silica bricks. Silica bricks have strong resistance to acidic slag erosion, but are easily eroded by alkaline slag. Their load softening temperature is very high, close to their refractoriness, and their volume does not shrink after repeated firing, and may even expand slightly, but their thermal shock resistance is poor. Silica bricks are mainly used in coke ovens, glass melting furnaces, acidic steelmaking furnaces, and other thermal equipment. Clay bricks contain 30%–46% alumina. They are made primarily from refractory clay, have a refractoriness of 1580–1770℃, good thermal shock resistance, and are classified as weakly acidic refractory materials. They are resistant to acidic slag corrosion, have a wide range of applications, and are the most produced type of refractory material.

 

Neutral

The main crystalline phases in high-alumina refractory products are mullite and corundum. The corundum content increases with the increase of alumina content. Corundum products containing more than 95% alumina are a widely used high-quality refractory material. Chrome bricks are mainly made from chromite, with chromite as the main crystalline phase. They have good corrosion resistance to steel slag but poor thermal shock resistance and a low high-temperature load deformation temperature. Chrome-magnesia bricks made from chromite and magnesia in different proportions have good thermal shock resistance and are mainly used as top bricks for basic open-hearth furnaces.

 

Alkaline

Represented by magnesia products. They contain more than 80%–85% magnesium oxide, with periclase as the main crystalline phase. The main raw materials for producing magnesia bricks include magnesite and seawater magnesia (magnesium hydroxide extracted from seawater and calcined at high temperatures). They have good resistance to alkaline slag and iron slag. Pure magnesium oxide has a melting point as high as 2800℃; therefore, the refractoriness of magnesia bricks is higher than that of clay bricks and silica bricks. Since the mid-1950s, the production of basic refractories has gradually increased due to the adoption of oxygen-blown converters for steelmaking and the use of basic open-hearth furnace tops, while the production of clay bricks and silica bricks has decreased. Basic refractories are mainly used in open-hearth furnaces, oxygen-blown converters, electric furnaces, non-ferrous metal smelting, and some high-temperature thermal equipment.

Send Inquiry