Quality control is crucial for ensuring the performance of fused refractory materials. Its core principle lies in controlling factors affecting three fundamental properties of the product: the degree of oxidation of the molten metal, the density, bonding, and uniformity of the crystal structure, and the size and location of shrinkage cavities.
The production process encompasses 16 key stages, from 3D drawing to packaging and shipping, and incorporates multiple quality control measures. After raw material sampling and testing by the automated batching system, secondary testing of raw materials is conducted. During high-temperature melting and casting and furnace material sampling and testing, real-time monitoring of melting and casting process data and chemical composition analysis are implemented. In the holding and annealing stage, the cooling rate must be controlled to prevent cracking of the product due to ZrO2 crystal transformation. In the semi-finished product unpacking and finished brick processing acceptance stages, inspections are conducted on the semi-finished product's appearance, dimensions, and physicochemical properties of the finished product, respectively. After finished brick sampling and testing, internal structural flaw detection is added. Finally, in the assembly and pre-marking stage, pre-assembled fused zirconia-corundum bricks meet the requirements of the glass melting furnace.
Specific measures include secondary testing of raw materials, such as careful selection of core raw materials, batch chemical analysis, and secondary inspection before feeding. The casting process is monitored in real time using intelligent technology. Chemical composition analysis during the casting process is performed using atomic absorption spectrophotometry and X-ray fluorescence spectrometry. Semi-finished product inspection involves the identification, sorting, and rejection of items such as appearance, dimensions, and chemical composition. Finished product inspection uses precision measuring tools to check appearance and dimensions, and high-precision equipment to test physicochemical indicators such as corrosion resistance and apparent porosity. Internal structural flaw detection of products includes radar scanning using a handheld non-destructive testing instrument from the United States.
To improve product quality, new materials such as low-glass phase exudation AZS casting materials and rare-earth element-added AZS bricks have been developed. Technologies such as homogenizing mixing devices have also been developed to improve the uniformity of raw material mixing and avoid dead zones in the mixing process.