Application areas of unshaped refractories

Mar 10, 2026

Leave a message

Unshaped refractories are widely used in industries such as iron and steel metallurgy, building materials, power, petrochemicals, and non-ferrous metallurgy. The iron and steel metallurgy sector is its primary market. In ironmaking systems, unshaped refractories are used for filling gaps in blast furnace lining bricks, forming a protective film between the furnace shell and cooling walls through grouting, and for spraying cracks in the lining.

 

In the building materials industry, unshaped refractories are mainly used in the cement, glass, and ceramics industries. In the cement industry, high-alumina or magnesia unburned bricks are used as linings for rotary kilns, with a service life of up to 1.5 years. Low-cement refractory castables and aluminate cement refractory castables are also widely used in local repairs of rotary kilns and preheater systems, accounting for approximately 35% of refractory materials in large cement plants. In the glass industry, they are mainly used for lining tin baths in float glass production lines and for hot and cold repairs of glass furnaces. In the ceramics industry, silicon carbide and lightweight refractory castables are mainly used as kiln linings.

 

In the power industry, monolithic refractories are key materials for the linings of thermal equipment such as boilers, circulating fluidized bed boilers, and waste incinerators in thermal power plants. With the increasing size of boilers, the demand for high-strength, wear-resistant, thermal shock-resistant, and erosion-resistant monolithic materials is growing. In the petrochemical industry, monolithic refractories are widely used in high-temperature equipment such as tubular furnaces, reformers, ethylene cracking furnaces, and platinum reforming units. For example, lightweight refractory castables are commonly used for tubular furnace linings, with a service life of up to 5 years. Aluminate cement refractory castables or low-cement refractory castables are often used for reformer linings, with a service life of up to 6 years. In the non-ferrous metallurgical industry, monolithic refractories are also widely used in equipment such as lead-zinc closed blast furnaces, aluminum electrolytic cells, smelting furnaces, and aluminum ingot heating furnaces. Among these, impermeable refractory castables have shown good results in aluminum electrolytic cells.

 

Selecting appropriate monolithic refractories can reduce heat loss in industrial kilns, resulting in a 20-30% reduction in furnace energy consumption. In addition, the application of unshaped refractories in the machinery manufacturing industry, waste incineration industry and other fields is also constantly expanding.

Send Inquiry