Acidic refractories are primarily composed of silicon dioxide, with silica bricks and clay bricks being common examples. Silica bricks are siliceous products containing over 94% silicon dioxide, using raw materials such as silica and waste silica bricks. They exhibit strong resistance to acidic slag erosion, high softening temperature under load, and do not shrink in volume after repeated firing, sometimes even expanding slightly. However, they are susceptible to erosion by alkaline slags and have poor thermal shock resistance. Silica bricks are mainly used in thermal equipment such as coke ovens, glass melting furnaces, and acidic steelmaking furnaces. Clay bricks, made primarily of refractory clay and containing 30%–46% alumina, are weakly acidic refractories with good thermal shock resistance and resistance to acidic slags, making them widely used.
Neutral refractories are primarily composed of alumina, chromium oxide, or carbon. Corundum products containing over 95% alumina are a widely used, high-quality refractories. Chromium bricks, with chromium oxide as the main component, exhibit good resistance to steel slag corrosion but have poor thermal shock resistance and a low high-temperature load deformation temperature. Carbonaceous refractory materials include carbon bricks, graphite products, and silicon carbide products. They have a very low coefficient of thermal expansion, high thermal conductivity, good thermal shock resistance, high high-temperature strength, and resistance to acid, alkali, and salt corrosion, especially weak acids and alkalis. They are not wetted by metals or molten slag and are lightweight. They are widely used as high-temperature furnace lining materials and also as linings for high-pressure reactors in the petroleum and chemical industries.