Lightweight firebrick, also known as insulating firebrick, is used to limit heat loss and reduce the weight of furnace insulation layers. Dezhong offers lightweight fireclay, high-alumina and mullite insulating brick options. Selection starts with the temperature at the installation position, the lining arrangement and the required balance between insulation and strength.


Lightweight fireclay insulating bricks
Lightweight Fireclay, High-Alumina and Mullite: How to Choose
Three insulating brick families
|
Product family |
Selection focus |
|
Lightweight fireclay insulating brick |
Discuss the insulation duty, temperature requirement and specified density. |
|
Lightweight high-alumina insulating brick |
Confirm the composition, density, strength and thermal data of the selected grade. |
|
Lightweight mullite insulating brick |
Review composition, temperature suitability, dimensional stability and insulation requirements. |



Colour varies with raw materials and processing. Use the material designation and technical data sheet to identify the product. Do not select a grade only by colour or rank all products by aluminium content alone.
Temperature and Installation Position
Tell us the temperature and installation position
Specify whether the brick will be used in back-up insulation or exposed to furnace conditions. The selected grade must match that duty; a product description or photograph alone does not establish suitability.
Check the temperature at the actual layer
Back-up insulation and a directly exposed lining can experience different temperatures and chemical conditions. Confirm operating temperature, occasional peaks, heating cycles and atmosphere. A classification temperature is not a universal continuous-service promise for every application.
Balancing Density, Strength and Thermal Conductivity
Dimensions and technical information
A commonly supplied standard size in our product information is 230 x 114 x 65 mm. Confirm the dimensions, tolerances, quantity and any special shapes when placing an order. The photograph below shows a dimensional check; the agreed drawing or order specification defines acceptance.

High-alumina insulating brick photographed during a dimensional check
For the selected grade, request bulk density, classification temperature, recommended service conditions, thermal conductivity at the stated temperature, cold crushing strength and permanent linear change after reheating. Values should identify the test method and relevant conditions.
Density is one part of the decision
Within comparable insulating materials, lower density can support lower heat storage and good insulation, but strength also needs to be checked. Compare grades using their actual thermal conductivity and strength data rather than density alone.
Back-Up Insulation vs. Directly Exposed Conditions
Assess contact with molten glass and the furnace atmosphere
For glass furnace projects, identify any direct molten-glass contact and the surrounding atmosphere. Confirm material suitability for that position separately; lightweight insulation should not be presented as a general replacement for glass-contact refractories.
What Information to Provide When Inquiring
What should I include in an inquiry
Include the furnace type, installation position, operating temperature, required brick family or grade, size, quantity and destination. Add specified density, thermal conductivity or strength requirements where available.
Inspection, Packing and Shipment
Agree on product type, dimensions, quantity and the required quality documents before shipment. Export packing can include wooden pallets or cases, film wrapping, bands, labels, shipping marks and a packing list. Confirm the wood treatment and packing arrangement for the order.

Packed mullite insulating bricks with film wrapping and external bands
The advance payment ratio and delivery schedule are confirmed for each order. For customized supply, confirm drawings and advance payment before formal scheduling. Following successful acceptance and settlement of the balance, the goods are prepared for delivery to the agreed port.
Request an insulating brick recommendation
Send your application details to zzdz@dzrefactory.com. We will discuss a suitable product option and confirm specifications, packing and delivery for your order.
Frequently Asked Questions
Q: Which types are available?
A: Lightweight fireclay, high-alumina and mullite insulating bricks are included in our product materials. Contact us to confirm the grade and quantity required.
Q: Is a lower density always better?
A: Selection also depends on strength, temperature, atmosphere and the lining arrangement. Compare the technical data for the actual grades under consideration.
Q: What size can I request?
A: Our product information lists 230 x 114 x 65 mm as a common standard size. Send special dimensions or drawings for supply confirmation.
Q: What should I include in an inquiry?
A: Include the furnace type, installation position, operating temperature, required brick family or grade, size, quantity and destination. Add specified density, thermal conductivity or strength requirements where available.