A supplier shows a bright pouring stream and a temperature reading. What does that tell you about the AZS blocks you will receive? Temperature monitoring is useful, but it cannot establish internal soundness, glass-contact performance or dimensional fit on its own. For buyers of fused cast alumina-zirconia-silica (AZS) blocks, the stronger question is how process records connect to the finished product.

Pouring at Dezhong. Process conditions must be considered together with the finished block inspection.
Request evidence that supports your furnace decision
The aim is not to select the supplier displaying the highest number. It is to understand whether the material, manufacturing controls and inspection plan suit your furnace position. This helps you compare quotations beyond the price per tonne and identify questions before production begins.
A temperature reading needs a measurement context
First establish what is being measured: a region inside the melting furnace, the pouring stream or another visible surface. These are different measurement targets. A hot spot in a melting image should not automatically be compared with a pouring-stream reading or described as the temperature of the entire melt.

Frame from Dezhong temperature-monitoring footage. The displayed reading belongs to this recording; it is not a universal AZS casting specification or a finished-product acceptance result
For infrared measurement, ask how the target, instrument settings and measurement conditions are defined. Emissivity and radiation from the surroundings can affect interpretation. A coloured image is a visual representation of the measurement, not an independent certificate of material quality.
Ask whether the record covers the relevant part of the pour, how the operating range is defined for that product, and how an out-of-range event is reviewed. A single screenshot cannot answer those questions.
Control continues after the pour
Temperature is one part of a coordinated process. Melting, mould filling, feeding during solidification and subsequent cooling all need to be considered. A recorded pouring temperature does not show how the block cooled or whether shrinkage was adequately fed.

Insulating-brick arrangement shown in Dezhong process materials for controlled cooling
At Dezhong, process controls include composite mould arrangements, insulation around selected castings and riser insulation for relevant casting types. These measures address heat transfer and feeding during solidification. Their application depends on block shape and casting requirements; they should not be reduced to one temperature promise.
For a buyer, the useful question is how the proposed casting and cooling arrangement suits the drawing, especially for large or complex blocks. The answer should be supported by an appropriate finished-product inspection plan.
Verify the result in the finished block
Temperature records support process review. Finished-block checks answer different questions. Chemical analysis checks composition; internal inspection assesses filling-related indications; dimensional and visual checks address geometry and condition. No single one of these substitutes for all the others.

Internal inspection at Dezhong. The inspection scope and acceptance criteria should be agreed for the order.
Our quality-control capabilities at Dezhong include X-ray fluorescence analysis, bulk density and apparent porosity testing, glassy-phase exudation and glass-corrosion testing, together with radar inspection for relevant glass-contact blocks. The order should define which checks apply, the sampling or inspection coverage, test conditions and acceptance criteria.
A radar indication needs technical interpretation; a photograph of an instrument is not a pass certificate. Discuss how the result is associated with the block identity and reviewed for its intended furnace position.
Five questions to ask before ordering
Use the same questions when comparing suppliers. The purpose is a clear technical agreement, not access to every confidential manufacturing setting.
|
What to ask |
What a useful answer includes |
|
What does the temperature record represent |
Measurement target, stage of the process and relevant instrument conditions. |
|
How is the pouring process reviewed |
The applicable control procedure, record coverage and handling of deviations. |
|
How does the casting arrangement fit the drawing |
Casting type, feeding and cooling considerations for the block geometry. |
|
How will finished quality be accepted |
Agreed composition, internal quality and dimensional checks, with methods and criteria. |
|
Can the result be linked to the supplied block |
A block or batch reference linking the applicable inspection documents to the order. |
Connect the evidence to the risk you need to manage
For a glass-contact position, clarify the glass composition, operating conditions and expected corrosion zone. For installation, clarify the drawing revision, joint requirements and identification. For a rebuild schedule, agree on inspection and release milestones before dispatch. Evidence is most useful when it answers a project-specific concern.
From technical questions to a clear order
Q: Does a higher casting temperature mean a better AZS block
A: Not by itself. A temperature figure only becomes meaningful when its measurement context and product-specific process requirements are known. Finished quality still requires the agreed inspections.
Q: Can thermal imaging replace internal inspection
A: No. Thermal monitoring of melting or pouring and internal inspection of a solid block assess different things. They provide complementary information, not interchangeable proof.
Q: What should an overseas buyer send to Dezhong
A: Send the furnace type, glass composition, installation position, operating conditions, block drawings and quantity. Include any specified grade, casting type, inspection requirements and target installation date. This lets the discussion focus on a suitable block and a clear acceptance plan.
Q: Discuss your AZS drawings and inspection requirements
A: Contact zzdz@dzrefactory.com to review your requirements. For customized orders, formal scheduling follows drawing confirmation and receipt of the agreed advance payment. Production is normally around 40 days, subject to the order; this is not an arrival-at-port commitment. Acceptance, balance settlement and delivery to the agreed port are arranged according to the contract.