Refractory Properties of Corundum Bricks
As shown in the Al2O3-Cr2O3 binary phase diagram, Al2O3 and Cr2O3 can form a continuous solid solution without the formation of eutectic. Therefore, adding Cr2O3 to high-purity corundum materials, regardless of the amount added, not only does not reduce the material's refractory properties, but actually improves them. The refractoriness (>1790 ℃) and load softening temperature (>1700 ℃) of chromium corundum bricks are superior to those of high-purity corundum products.
Strength of Corundum Bricks
The room temperature compressive strength of high-purity corundum bricks is generally 70–100 MPa, while the room temperature compressive strength of high-performance chromium corundum bricks is generally >150 MPa, significantly higher than that of regular corundum bricks. This is because during the firing process, Al2O3-Cr2O3 solid solutions form between particles, between particles and fine powders, and between fine powders themselves. These solid solutions act like bridges, connecting the particles and fine powders, significantly increasing the material's strength.
Thermal Shock Stability
According to reports, when Cr2O3 is added to corundum, the thermal shock stability decreases with increasing Cr2O3 content, especially when the Cr2O3 content is between 10% and 66%. In other words, chromium corundum bricks with low Cr2O3 content have better thermal shock stability than those with high Cr2O3 content.
Slag Erosion Resistance
Solubility of various refractory oxides in molten coal slag: The solubility of Cr2O3 in coal gasification slag (SiO2-CaO system) and various glass melts is much lower than that of other oxide materials. Therefore, Cr2O3 or Cr2O3-containing refractory materials have good resistance to corrosion from steel slag, non-ferrous smelting slag, coal gasification slag, oil gasification slag and various glass melts.
