How to Evaluate Fused Cast AZS Block Quality

Jul 13, 2026

Leave a message

1.Do Not Judge AZS Blocks by Price Alone

When buying fused cast AZS blocks for glass furnaces, price and chemical composition are only the first layer of information. What truly matters is long-term stability in molten glass service.


A cheaper AZS block can become the most expensive choice if it fails early in a critical furnace zone, causing downtime, glass defects, repair costs, and production losses.

 

2. Start with the Melting Process
For high-quality fused cast AZS blocks, the melting process is the first point to check. The oxidizing process helps reduce carbon contamination, producing cleaner blocks and lowering the risk of bubbles, seeds, blisters, and streaks in glass.

 

For float glass, container glass, pharmaceutical glass, and tableware glass furnaces, buyers should ask whether the supplier uses the oxidizing process and request related testing evidence.

info-500-500
info-500-500
info-500-500

3. Casting Method Controls Internal Void Risk
After molten AZS is poured into the mould, it solidifies from the outside inward. Shrinkage voids may form during cooling. Whether the void position is controlled is a key factor in judging suitability for critical furnace areas.


Standard cast products may be suitable for less critical areas. Sidewalls, throats, bubbling blocks, weirs, and other severe glass-contact zones should use higher-density, near-void-free, or void-free cast products.

info-500-500
info-500-500
info-500-500

4. Annealing Is Where Hidden Quality Is Built
Annealing quality is difficult for buyers to see from the outside, but it affects internal stress release, crystal growth, micro-crack risk, and long-term corrosion resistance.


Composite sand mould technology, mullite brick insulation, and hollow silica-alumina ball insulation at the riser are all designed to make cooling more balanced, improve internal density, and reduce shrinkage void risk.

info-500-500
info-500-500
info-500-500

5. Testing Turns Quality Claims into Evidence
A reliable AZS supplier should provide more than a composition sheet. It should have testing capability for chemical composition, bulk density, apparent porosity, glass phase exudation, static and dynamic molten glass corrosion, and bubbling tendency.


Dezhong is equipped with a Rigaku ZSX PrimusIII+ XRF spectrometer for fast and accurate chemical analysis of each furnace sample, along with equipment for glass phase exudation, corrosion resistance, bulk density, and apparent porosity testing.

 

 

Key Testing Items

 

 

Testing Item

What It Shows

Dezhong Capability

Chemical composition

ZrO2, Al2O3, SiO2, Na2O stability

Rigaku ZSX PrimusIII+ XRF

Bulk density & apparent porosity

Density and structure

In-house testing equipment

Glass phase exudation

Glass contamination risk

Glass phase exudation test furnace

Static corrosion

Resistance in static molten glass

Static molten glass corrosion test furnace

Dynamic corrosion

Closer to flowing molten glass

Dynamic molten glass corrosion test furnace

Radar flaw detection

Hidden voids and internal defects

GSSI radar flaw detection system

 

info-500-500
info-500-500
info-500-500
info-500-500
 

6. NDT Protects the Most Critical Furnace Zones
Even when chemistry is acceptable, hidden internal shrinkage voids may still exist. In glass-contact and critical furnace zones, internal defects can directly affect furnace campaign life.


Dezhong uses a GSSI ground-penetrating radar system from the United States for non-destructive inspection of WS glass-contact products. Radar images help identify internal shrinkage voids and prevent risky blocks from being installed in critical positions.

info-500-500
info-500-500
info-500-500
info-500-500
 

7. Traceability and Pre-Assembly Build Buyer Confidence
One-brick-one-code traceability links each block to raw materials, production, inspection, storage, and shipment records. If a problem occurs, the root cause can be identified faster and improvement becomes more systematic.


Factory pre-assembly checks dimensions, joint width, flatness, numbering, and completeness before shipment, reducing the risk of discovering fit problems during on-site installation.

info-500-500
info-500-500
info-500-500
info-500-500
 

8. Real Quality Comes from Full-Process Control
High-quality fused cast AZS blocks are not defined by one chemical indicator alone. They are the result of raw material control, melting, casting, annealing, machining, testing, non-destructive inspection, pre-assembly, and traceability.


When choosing an AZS supplier, buyers should ask whether the factory has a stable process, complete testing capability, real data, pre-assembly ability, and responsibility for every block shipped.

 

Why Work with Dezhong
Founded in 2013, Zhengzhou Dezhong Refractory focuses on fused cast AZS33#, AZS36#, AZS41#, low-silica low-sodium AZS, alpha-beta series, and Z80 high zirconia ceramic products for glass furnaces.


Dezhong is equipped with 8T and 10T electric arc furnace production lines, more than 60 machining equipment sets, in-house testing equipment, GSSI radar inspection, and two 1,000 m2 pre-assembly platforms.


If you are selecting AZS blocks for float glass, container glass, pharmaceutical glass, or other glass furnace projects, Dezhong can recommend products according to furnace zones, corrosion severity, and project drawings.

 

Contact Us

Send us your furnace drawing, application zone, or current block requirement. Our team can recommend suitable AZS33, AZS36, AZS41, or low-silica low-sodium AZS products.

Our address

Yuhuangmiao Village, Goutang Town, Xinmi City, Henan Province

Phone Number

modular-1

 

 

Send Inquiry